
Add to Cart
AC Current Transmitter A-CS300E
A Current Transmitter applying the Hall effect open-loop principle can measure the AC signal current under electrical isolation and convert it into a DC signal output.
Electrical characteristics | ||||||||
| Type | A-CS30E | A-CS50E | A-CS100E | A-CS150E | A-CS200E | A-CS300E |
|
IPN | Primary nominal input current | 30 | 50 | 100 | 150 | 200 | 300 | A(rms) |
IP | Measuring range of primary current | 0~60 | 0~100 | 0~200 | 0~300 | 0~400 | 0~600 | A(rms) |
VOUT | Nominal output voltage | 4±1%(DC) | V | |||||
VC | Supply voltage | ±12~±15(±5%) | V | |||||
IC | Current consumption | VC=±15V <20 | mA | |||||
εL | Linearity | <±1 | %FS | |||||
X | Precision | TA =25℃ ±0.5 | %FS | |||||
IOT | Thermal drift of V0 | TA =-25℃~+85℃ <0.005 | mA/℃ | |||||
Tr | Response time | ≤20 | ms | |||||
f | Frequency bandwidth | 20Hz~20KHZ | kHz | |||||
TA | Ambient operating temperature | -25~+85 | ℃ | |||||
TS | Ambient storage temperature | -40~+100 | ℃ | |||||
R | Load Resistance | ≥10K | Ω | |||||
m | Mass | 62 | g | |||||
| Standard | Q/320115QHKJ01-2013 |
| |||||
Dimensions of drawing (mm) |